------ CUR-DLS -----



--------------BIOS--------------------

dlsas009.zip	CUR-DLS BIOS Revision 1009 (Jun/26/2001)

	1. Fix "unexcepted ECC error" bug.

	2. Update Microcode.

	3. Enable thermal throttle at POST code 0D.

	4. Support MXIC MX29F040.

	5. Add option to disable onboard LAN.

	6. Set DRAM refresh rate by SPD byte 12.



dlsas005.zip	CUR-DLS BIOS Revision 1005 (Apr/10/2001)

	1. Add patch to fix system will sometime hang at POST code 81.



dlsas004.zip	CUR-DLS BIOS Revision 1004 (Apr/10/2001)

	1. Set DMI type 19 WIDTH field to 4.

	2. Fix OS2 dual processors system will hang.

	3. Fix incorrect DMI information of CPU family name when CuMine C0 stepping CPU is 

	   plugged.

	4. Fix incorrect CPU thermal throttle temperature.



dlsas03.zip	CUR-DLS BIOS Revision 1003 (Dec/20/2000)

	1. Update LSI SCSI BIOS to 4.18.002.

	2. Support SST 39SF040.

	3. Change in CPU temperature for 1GHz/933MHz/866MHz to 75/80/85 degrees Celsius.

	4. Fix 2K PS/2 mouse bug with "!" when PS/2 mouse cannot be detected.  

	5. Solve the conflict of CPU and IOAPIC APIC ID.

	6. Allocate at least 1M memory for P2P bridge even there is no resource requriment 

	   behind P2P.

	7. Change setup option of remote console to "Disable/Enable/POST only".

	8. IRQ 9 is not masked during POST.

	9. Assign MYLEX AcceleRAID160's interrupt to IRQ9 when floppy cannot be booted. 

       10. Add class string for class 0d,0e,0f,10 for "PCI device listing".





rdls1002.zip	CUR-DLS BIOS Revision 1002 (Nov/22/2000)

	1. Add ACPI _UID for motherboard resource.

  	2. Fix the bug of "a disabled COM port with '!' " under W2K.

	3. Update LSI SCSI BIOS to 41800.

	4. Fix the bug of Adaptec 29160 will hung during POST.(PMM)

	5. Show the speed of chassis fan2 in setup menu.

	6. Set the default of setup menu "boot->Other boot" to "SCSI".

	7. Coppermine 933 and below, throttle when temperature higher than 72C.

	8. Coppermine 1G and above, throttle when temperature higher than 67C.

	9. Fix the DMI DIMM size error of module-3 when 4G DRAM plug.

       10. Secondary IDE channel can be disable.



rdls1001.zip	CUR-DLS BIOS Revision 1001 (Oct/30/2000)

	1. Change BIOS image form 2M to 4M.  (Please use Aflash 1.26 to update the BIOS. 

	   If update 4M BIOS image to the system with 2M BIOS, please use "aflash /auto 

  	   filename /cdmi")

	2. Support thermal throttle.

	3. Add MicroCode for 1Ghz CPU(686).

	4. Fix the bug of Automatic powerup will not work, if RTC power is remove once.

	5. Support PS2 mouse wakeup form S1.

	6. Fix the bug of set ECP to ECP+EPP mode.

	7. Fix the bug of update ESCD fail when more than 2 PCI cards are pluged.

	8. Fix the bug of WinNT 4.0 installation will turn off SCSI termination.

	9. Fix the bug of Secondary IDE failure when enable ECP.

       10. Fix the bug of Win2000 ECP not found.

       11. Fix the bug of Win2000 can't install to IDE HD.

       12. Update LSI 53Cxxx BIOS to 4.17.

       13. Fix bug of Automatic power-Up not work.



rdls1000.zip	CUR-DLS BIOS Revision 1000 (Jun/28/2000)

	1. First Release.



------------ Manual ---------------

curdls-100.pdf	PCB Rev.1.00/English e532 May/2000

lsi896.pdf 	LSI Integrated SCSI Manual e534 Jun/2000 

	

		LSI 896 32-bit Dual Channel Ultra2 SCSI

		LSI 896 32-bit 1010-33 32-bit 2Ch. Ultra 160 SCSI

		LSI 896 32-bit 1010-66 64-bit 2Ch. Ultra 160 SCSI