---- CUSL2 ---



--------------BIOS-----------------

"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""

Notice:

If you are going to upgrade BIOS from BIOS version 1001.A (and earlier) for CUSL2 or 1002.A 

(and earlier) for CUSL2, please make sure the following item in the BIOS setup menu is set 

at [PCI/AGP] before updating the BIOS.



Advanced -> PCI Configuration -> VGA BIOS Sequence 



In case the system is unable to start up properly after performing BIOS upgrade, please 

remove all the add-on VGA adapters from the system and start up the system with the onboard 

AGP graphics controller. The add-on VGA adapters then can be installed after loading the 

setup default from the BIOS setup menu.





csla1007.zip	CUSL2 BIOS 1007 with Software AC ' 97 Audio (Jun/05/2001)

cusl1007.zip	CUSL2 BIOS 1007 without Audio (Jun/05/2001)



csla1006.zip	CUSL2 BIOS 1006 with Software AC ' 97 Audio (03/09/2001)

cusl1006.zip	CUSL2 BIOS 1006 without Audio (03/09/2001)





csla1003.zip	CUSL2 BIOS 1003 with Software AC ' 97 Audio (11/17/2000)

cusl1003.zip	CUSL2 BIOS 1003 (10/30/2000)

		1. Fix incorrect DMI information of CPU family name when CuMine C0 stepping CPU is used.

		2. Fix AOpen PA3030 AGP card cannot enter VGA setup by pressing INSERT key.

		3. Fix Win98 SE cannot be installed from its bootable CD if a CNR modem card is populated.

		4. Fix sytem cannot resume from S3 (Suspend-to-RAM state) if Intel PIII 933MHz CPU is used.

		5. Fix an UDMA mode 5 IDE hard disk cannot be enabled in Win2K device manager.



cusl1002.zip	CUSL2 BIOS 1002 (09/21/2000)

		1. Calibrate CPU temperature reading from hardware monitor. 

		2. Add "Wakeup key" setup option for "Wake Up By PS2 Keyboard" setup item. 

		3. Fix all buttons with function failure in I-Panel after Windows Millennium 

		   resumes from S1 for a PS2 keyboard/mouse wake-up event. 

		4. Fix exception error occured sometimes when running Final Reality after 

		   Win98SE resumes from S3 if CPU/SDRAM frequencies are 133MHz/133MHz. 

		5. Fix system cannot operate CPU/SDRAM at 110MHz/110MHz if it powers on in 

		   JumperFree mode. 

		6. Add 'Graphics Window Size' setup item for AGP VGA. 

		7. Support Intel 1GHz CPU (CPU ID = 686). 

		8. Support I-Panel. 

		9. Support VIAR Cyrix III CPU. 

		10. Fix system cannot boot from a bootable 720K diskette if CPU internal 

		    frequency is greater than 667MHz. 

		11. Add 'JTPWR Temperature' setup option. 

		12. Add 'AGP Capability' setup option. 

		13. Change 'VGA BIOS Sequence' setup option to 'Primary VGA BIOS' setup option. 

"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""



cusl101a.zip	CUSL2 BIOS 1001a. (23/Jun/2000)

		1. Disable game port and MIDI port if no onboard AC97 codec.

		2. Fix system hangs in jumper mode if CPU, SDRAM and PCI frequencies

		   are 133, 133 and 33 MHz respectively.

		3. Fix Windows 2000 reboot test failure.



cusl1001.zip	CUSL2 BIOS 1001. (16/Jun/2000)

		1. First Release.



--------- Manual ---------

cusl2-102.pdf	PCB Rev.1.02/English (e595) (August 2000)

t_cusl2-102.pdf	PCB Rev.1.02/Traditional Chinese (t595) (August 2000)

cusl2-101.pdf	PCB Rev.1.01/English (e574) (June 2000)