©2002 KURIAKI BIOS DATABASE

MX3S

mx3s126.zip R1.26 05/17/2002 309KB 
Checksum 4649h 
Enhance memory performance. 
 
mx3s125.zip R1.25 04/23/2002 312KB 
Checksum A2F1h 
Fixed Fujitsu ATA 100 HDD hang up on Windows 2000. 
Support HDD which over 137GB size.  
Keep CPU fan swirling while entering S1.  
Changed the default setting of year from 2001 to 2002  
 
mx3s123.zip R1.23 01/10/02 307KB 
Checksum C841h 
Supports boot from USB storage device (FDD, ZIP, etc) 
Updates CPU ratio up to x16. 
Shows "Diskette Drive B: None" on POST process. 
 
mx3s122.zip R1.22 12/05/01 306KB 
Checksum 7895h 
Fixed: USB KB and USB mouse do not work when resuming from S3. 
Fixed: CPU ratio goes wrong correct when resuming from S3. 
Fixed: detection error of some ATA66/ATA100 HDD (eg. ST320414A & ST315323A). 
Fixed: failure to go into S3 in Win 98SE/ME when USB device is present. 
Fixed: very slow installation of Win 2000 in NTFS format with "CPU Warning Temperature" enabled. 
Fixed: incompatibility with VIA C3 733/800MHz CPU 
 
mx3s115.zip R1.15 07/06/01 304KB 
Checksum 925Bh 
New micro code for FC-PGA Coppermine CPU. 
Fixed 3 floppy drives listed in 'My Computer' in Win 2000 if one Legacy FDD and one USB FDD are installed at the same time. 
Updates flashing utility. 
Supports Intel CPU Ratio up to x12. 
Change safe boot ratio (with HOME key pressed) at 133MHz FSB from x3.0 to x4.0. 
Fixed no harddisk found in Windows 2000 setup. 
Fixed hang-up of OS if PS2 mouse with scroll wheel and USB keyboard installed at the same time. 
 
mx3s113.zip R1.13 04/30/01 303KB 
Checksum D6A3h 
Displays the temperature on the motherboard instead of inside the CPU. 
Integrated with new AOpen logo on POST screen. 
 
mx3s109.zip R1.09 01/29/01 295KB 
Checksum 8FF5h. 
Fixed malfunction of power button after resuming from STR in Win ME. 
Fixed system hang-up during installation of Win98SE, when ACPI function isset to "Disabled". 
Sets safe-mode boot ratio to x3 at 133MHz, x3.5 at 100MHz and x4.5 at 66MHz. 
Updates VGA BIOS to d8152256.dat. 
Improves compatibility with USB storage devices. 
Sets 2X for ATI MAXX AGP card. 
Fixed that ZIP drive cannot be displayed as "Removable Disk" when emulating HDD in Win98/95 . 
Fixed that Win ME shows 1 floppy drive in My Computer even when none has been set in the BIOS. 
Fixed system hang-up at POST when connecting a FirePort SCSI card (DIAMOND-4.09.06). 
Fixed sluggish responding of serial mouse in some conditions. 
 
mx3s108.zip R1.08 11/08/00 267KB 
Checksum F21Fh. 
Added one "Onboard CNR Lan" item in Integrated Peripherals. BIOS default setting is "Enabled". Must work with newer hardware revisions.

 
mx3s107.zip R1.07 09/29/00 267KB 
Checksum 66C1h. 
Updates SMBus function. 
Fixes system hang on VGA BIOS initialization if resuming from STR if ATI/RAGE 128 installed. 
Fixes that system would wakeup immediately after entering power-on suspend in APM DOS mode with USB KB plugged.

 
mx3s106.zip R1.06 08/25/00 266KB 
Supports 'boot to next sequence' when OS boot fails. 
Displays CPU speed as 500A or 533A MHz for Coppermine/128K (Celeron). 
Updates BIOS flashing utility. 
Displays 666MHz (66.7X10 or 133.3X5) instead of 667MHz. 
Fixed Temp2 sensor beep error when running with Cyrix III CPU. 
 
mx3s101.zip R1.01 07/05/00 266KB 
Checksum F2DEh 
Initial Release