©2002 KURIAKI BIOS DATABASE

AX6BC Pro/AX6BC Pro Gold

Last Updated: 01/24/02

6bcp114.zip R1.14 01/24/2002 200KB 
Checksum 13E2h
Fixed failure of resuming from S1 in Win 2000/XP. 
Japanese version 6bcp114j.zip  
 
6bcp113.zip R1.13 12/18/2000 198KB 
Checksum DEB2h
Fixed serial mouse malfunction after suspend (S1). 
Japanese version 6bcp113j.zip  
 
6bcp112.zip R1.12 08/18/2000 198KB 
Checksum 68F9h
No longer displays 'B' nor 'E' for Katmai and Coppermine of frequency over 600 MHz. 
No longer displays 'B' nor 'E' for Coppermine 128K (Celeron) CPU. 
Displays suffix 'A' for only Coppermine128K 533 MHz. 
Displays 800 for Coppermine 800/100 instead of 800E. 
Fixed detection error of 900 MHz (100x9) CPU (used to be 901MHz). 
Update Aoflash utility. 
Updates Slot 1 CPU micro code (CPUID=0686H). 
Updates FC-PGA package CPU micro code (CPUID=0686H). 
Supports Winbond W49F002U EEPROM. 
Japanese version 6bcp112j.zip
  
 
6bcp111.zip R1.11 04/12/2000 195KB 
Checksum 9553h
No longer shows 'B' or 'E' for Katmai/Coppermine CPU of frequencies over 600MHz. 
Supports ACPI 1.0B. 
Add 'floopy seek' function; disabled by default. 
Updates CPU microcodes. 
Fixes shutdown failure when USB mouse plugged.  
[Note] Please follow steps below to flash this new type BIOS of AX6BC Pro motherboards.

Procedure:

Download this zipped file. 
Run shareware PKUNZIP (http://www.pkware.com/) which supports miscellaneous operation systems to extract the binary BIOS file and the flash utility. Or Winzip (http://www.winzip.com/) in Windows environment. 
Save "6BCP111.EXE" and "6BCP111.BIN" to a DOS floppy disk. Reboot your system with this disk without loading any memory handler (suh as EMM386) or device driver to get as much free space as possible. If you have an EPROM writer, simply take the .BIN file to program your BIOS. 
Execute A:>6BCP111 and the program will do the rest of it. 
DO NOT turn off power during flashing process, until you are asked to!! 
Reboot system and press "DEL" to enter BIOS setup, load "BIOS SETUP DEFAULT", then SAVE and EXIT. Done! 
 
6bcp107.exe R1.07 10/23/1999 276KB 
Improves IDE HDD compatibility. 
Mofidied CPU Voltage/Speed adjudtment menu. 
Supports bootable function of Win2000 CD. 
Supports Coppermine CPU.
Binary file 6bcp107.bin, checksum 9559h 
 
6bcp105.exe R1.05 08/27/99 275KB 
Improvements:
Split "system frequency"; "FSB" and "ratio" have to be selected seperately. 
Support FM3540. 
Add "CPU Voltage detected"; display 2.10V/2.20V rather than Vcore+0.1V/Vcore+0.2V. 
Support Pentium III 600MHz.
Binary file 6bcp105.bin, checksum 220Ah 
 
6bcp101.exe R1.01 6/23/99 275KB 
Improvements:
"Y2K CMOS Update" set to "Enabled" by setup default . 
Enhance function of Y2K patch for better compatibility with test program "Checkcom". 
First Init VGA set to "AGP" by setup default, system will boot with AGP card if any. 
Update ESCD always enabled. 
Supports Pentium III 550MHz/100MHz FSB. 
Vcore adjustable for 1.8V (raised by 0.1V or 0.15V) and 2.8V (raised by 0.2V).