©2002 KURIAKI BIOS DATABASE

AX3S / AX3S Pro
 
ax3s123.zip, for AX3S R1.23 01/21/02 308KB 
ax3sp123.zip, for AX3S Pro R1.23 01/21/02 308KB 
Checksum AX3S: 88BDh, AX3S Pro: CA11h 
Supports boot from USB storage devices like FDD, ZIP. etc. 
Updates CPU ratio to x16. 
 
ax3s120.zip R1.20 07/06/01 305KB 
Checksum C844h 
New micro code for FC-PGA Coppermine CPU. 
Fixed 3 floppy drives listed in 'My Computer' in Win 2000 if one Legacy FDD and one USB FDD are installed at the same time. 
Updates flashing utility. 
Supports Intel CPU Ratio up to x12. 
Change safe boot ratio (with HOME key pressed) at 133MHz FSB from x3.0 to x4.0. 
Fixed no harddisk found in Windows 2000 setup. 
 
ax3s117.zip R1.17 04/10/01 304KB 
Checksum 5F9Dh 
Improved in executing ACPI function, including suspend (S1-S5) and wake-up (by keyboard/mouse/LAN/modem/RTC) 
Improved compatibility with harddisks. 
 
ax3s115.zip R1.15 03/06/01 296KB 
Fixed detection error of ATA66 harddrives. 
Fixed that ZIP drive cannot displayed as "Removable Disk" when emulating HDD in Win98/95. 
Displays frequency in "GHz" for Penitum III. 
Fixed that Windows-ME listed 1 floppy drive in My Computer even when 'NONE' had been set in BIOS. 
Supports boot from USB storage device. 
 
ax3s114.zip R1.14 12/18/00 292KB 
Checksum 74BAh 
Updates VGA BIOS to d8152256.dat. 
Fixed malfunction of USB device after resuming from S4. 
Modified Help string of CPU speed setting. 
 
ax3s112.zip R1.12 11/29/00 287KB 
Checksum E6DAh 
Updates VGA BIOS to d8152231.dat. 
Fixed that PWRBTN can not work after STR in Windows/ME. 
Fixed system hang-up during installation of Win98SE, when ACPI function is set to "Disabled". 
 
ax3s108.zip R1.08 09/29/00 267KB 
Checksum 095Bh 
Fixes that system would wakeup immediately after entering power-on suspend mode in APM DOS mode with USB KB plugged. 
 
ax3s107.zip R1.07 08/17/00 266KB 
Checksum 0F96h 
Fixed incompatibility wth ATi Rage 128 AGP card. 
Fixed that in Win 98 Original Editon, LED indicated the state of suspend (red)
after restarting system in MS-DOS. 
Fixed error message (beep) of TEMP2 sensor with Cyrix III CPU onboard. 
Fixed Device I/O error in HCT 9.501. 
 
ax3s100.zip R1.00 07/05/00 266KB 
Checksum B505h 
Initial Release