AMAZON Main B/D CMOS SETUP
사용 키
Help(도움말) F1
Back(이전 항목 이동) ESC
Select(선택) Enter
Previous Item(이전 항목) 위 방향 키
Next Item(다음 항목) 아래 방향키
Select Menu(메뉴 선택) 좌, 우 방향 키
Setup Default(기본 셋업) F5
Previous Values(이전 값) F6
Save & Exit(저장 및 종료) F10
부팅 시 F1 KEY 누름
1단계 2단계 3단계 선택 옵션
Main System Date 날자 설정
System Time 시간 설정
Floppy Options Press Enter
  Floppy A: Installed
  Floppy B: Installed
  Floppy A: Type Not / 360K 5.¼/ 1.2M 5.¼ /
  Floppy B: Type 720KB ½ / 1.44M ½ / 2.88M ½
  Floppy Access Read/Write, Read Only
  Primary IDE Master 선택된 디바이스 명 표시
  IDE Device Configuration Auto Configured, User Definable, Disabled
  IDE Translation Mode Standard CHS, Logical Block, Auto Detect
  Multiple Sector Setting Disabled, 4Sector/Block, 8Sectors/Block, Auto Detected
  Fast Programmed I/O Modes Disabled, Auto Detected
Primary IDE Slave IDE Device Configuration Auto Configured, User Definable, Disabled
  IDE Translation Mode Standard CHS, Logical Block, Auto Detect
  Multiple Sector Setting Disabled, 4Sector/Block, 8Sectors/Block, Auto Detected
  Fast Programmed I/O Modes Disabled, Auto Detected
Secondary IDE Master IDE Device Configuration Auto Configured, User Definable, Disabled
  IDE Translation Mode Standard CHS, Logical Block, Auto Detect
  Multiple Sector Setting Disabled, 4Sector/Block, 8Sectors/Block, Auto Detected
  Fast Programmed I/O Modes Disabled, Auto Detected
Secondary IDE Slave IDE Device Configuration Auto Configured, User Definable, Disabled
  IDE Translation Mode Standard CHS, Logical Block, Auto Detect
  Multiple Sector Setting Disabled, 4Sector/Block, 8Sectors/Block, Auto Detected
  Fast Programmed I/O Modes Disabled, Auto Detected
  Language English (US)
  Boot Options Press Enter
  First Boot Device Disabled, Floppy, Hard Disk, CD-ROM, Network
  Second Boot Device Disabled, Floppy, Hard Disk, Network
  Third Boot Device Disabled, Floppy, Hard Disk, Network
  Fourth Boot Device Disabled, Floppy, Hard Disk, Network
System Cache Enabled, Disabled
  Boot Speed Deturbo, Torbo
  Num Lock Off, On
  Setup Prompt Enabled, Disabled
Hard Disk Pre-Delay Disabled, 3/6/9/12/15/21/30 Seconds
  Typematic Rate Programming Default, Override
  Typematic Rate Delay 250msec, 500msec, 750msec, 1000msec
Typematic Rate 6, 8, 10, 12, 15, 20, 24, 30 char/sec
  Scan User Flash Area Disabled, Enabled
Video Mode   EGA/VGA
Mouse   Installed
Base Memory   640 KB
  Extended Memory xxxxxx KB
  BIOS Version 1.00.01.DB0
Advanced Processor Type CPU Type 표시
  Processor Speed CPU 속도 표시
  Cache Size Cache 용량 표시
Peripheral Configuration Press Enter
  Configuration Mode Auto, Manual
  Primary IDE Interface Auto, Disabled, Enabled
  Secondary IDE Interface Auto, Disabled, Enabled
  Floppy Interface Auto, Disabled, Enabled
  Serial Port1 Address Disabled, COM1 3F8 IRQ4, COM3 3E8 IRQ4
  Serial Port2 Address Disabled, COM2 2F8 IRQ3, COM4 2E8 IRQ3
  Serial Port2 IR Mode Disabled: 본 제품은 지원하지 않음
  Parallel Port Address Disabled, LPT3 3BC IRQ7, LPT1 378 IRQ7, LPT2 278 IRQ 7, LPT3 3BC IRQ5, LPT1 378 IRQ5, LPT2278 IRQ5
Parallel Port Mode Compatible, Bi-directional, ECP, EPP
  Advanced Chipset Configuration Press Enter
  Base Memory Size 640KB
  ISA LFB Size Disabled, 1MB
  ISA LFB Base Address 위 항목 선택 시 표시됨
  Video Palette Snoop Disabled, Enabled
  Latency Timer(PCI Clocks) 0 ~ 256(기본: 66)
  Memory Error Correction Disabled, Enabled
  Bank 0 SIMM Detected 메모리 타입 표시
  Bank 1 SIMM Detected 메모리 타입 표시
Power Management Configuration Press Enter
  Advanced Power Management Disabled, Enabled
  IDE Drive Power Down Disabled, Enabled
  VESA Video Power Down Disabled, Standby, Suspend, Sleep
  Inactivity Timer(Minutes) 0 ~ 256(기본: 2)
  Hot Key(Ctrl - ALT -) A
  Plug and Play Configuration Press Enter
  Configuration Mode Use Setup Utility 선택 시
  ISA Shared Memory Size Disabled, 16, 32, 48, 64, 80, 96KB
  IRQ 5 Available, Used by ISA Card
  IRQ 9 Available, Used by ISA Card
  IRQ 10 Available, Used by ISA Card
  IRQ 11 Available, Used by ISA Card
  IRQ 12 Available, Used by ISA Card
  Plug and Play Configuration Press Enter
  Configuration Mode Use ICU 선택 시
  Boot with PnP OS Non, Other, Windows 95 TM
Security User Password is   Enabled
  Administrative Password is Enabled
  Set User Password Press Enter
  Set Administrative Password Press Enter
  Unattended Start Disabled
  Security Hot Key(CTRL - ALT -)
Exit Exit Saving Changes   Press Enter
  Exit Discarding Change Press Enter
  Load Setup Default Press Enter
Discard Change   Press Enter