AMAZON II/III Main B/D CMOS SETUP
사용 키
Help(도움말) F1
Back(이전 항목 이동) ESC
Select(선택) Enter
Previous Item(이전 항목) 위 방향 키
Next Item(다음 항목) 아래 방향키
Select Menu(메뉴 선택) 좌, 우 방향 키
Setup Default(기본 셋업) F5
Previous Values(이전 값) F6
Save & Exit(저장 및 종료) F10
부팅 시 F1 KEY 누름
1단계 2단계 3단계 선택 옵션
Main System Date 날자 설정
System Time 시간 설정
Floppy Options Press Enter
  Floppy A: Installed
  Floppy B: Installed
  Floppy A Not / 360K 5.¼/ 1.2M 5.¼ /
  Floppy B 720KB ½ / 1.44M ½ / 2.88M ½
  Floppy Access Read/Write
  Primary IDE Master 선택된 디바이스 명 표시
  IDE Device Configuration Auto Configured, User Definable, Disabled
  IDE Translation Mode Standard CHS, Logical Block, Auto Detect
  Multiple Sector Setting Disabled, 4Sector/Block, 8Sectors/Block, Auto Detected
  Fast Programmed I/O Modes Disabled, Auto Detected
  Primary IDE Slave IDE Device Configuration Auto Configured, User Definable, Disabled
  IDE Translation Mode Standard CHS, Logical Block, Auto Detect
  Multiple Sector Setting Disabled, 4Sector/Block, 8Sectors/Block, Auto Detected
  Fast Programmed I/O Modes Disabled, Auto Detected
Secondary IDE Master IDE Device Configuration Auto Configured, User Definable, Disabled
  IDE Translation Mode Standard CHS, Logical Block, Auto Detect
  Multiple Sector Setting Disabled, 4Sector/Block, 8Sectors/Block, Auto Detected
  Fast Programmed I/O Modes Disabled, Auto Detected
  Secondary IDE Slave IDE Device Configuration Auto Configured, User Definable, Disabled
  IDE Translation Mode Standard CHS, Logical Block, Auto Detect
  Multiple Sector Setting Disabled, 4Sector/Block, 8Sectors/Block, Auto Detected
  Fast Programmed I/O Modes Disabled, Auto Detected
  Language English (US)
  Boot Options Press Enter
  First Boot Device Disabled, Floppy, Hard Disk, CD-ROM, Network
  Second Boot Device Disabled, Floppy, Hard Disk, Network
  Third Boot Device Disabled, Floppy, Hard Disk, Network
  Fourth Boot Device Disabled, Floppy, Hard Disk, Network
  System Cache Enabled, Disabled
  Boot Speed Deturbo, Torbo
  Num Lock Off, On
  Setup Prompt Enabled, Disabled
  Hard Disk Pre-Delay Disabled, 3/6/9/12/15/21/30 Seconds
  Typematic Rate Programming Default, Override
  Typematic Rate Delay 250msec, 500msec, 750msec, 1000msec
  Typematic Rate 6, 8, 10, 12, 15, 20, 24, 30 char/sec
  Scan User Flash Area Disable: 이 항목은 사용되지 않음
  Video Mode EGA/VGA
  Mouse Installed
  Base Memory 640 KB
  Extended Memory xxxxxx KB
  BIOS Version x.xx.xx.xxx
Advanced Processor Type CPU Type 표시
  Processor Speed CPU 속도 표시
  Cache Size Cache 용량 표시
Peripheral Configuration Press Enter
  Primary IDE Interface Auto, Disabled, Enabled
  Secondary IDE Interface Auto, Disabled, Enabled
  Floppy Interface Auto, Disabled, Enabled
  Serial Port1 Address Disabled, COM1 3F8 IRQ4, COM2 2F8 IRQ3, COM3 3E8 IRQ4, COM4 2E8 IRQ3, COM1 3F8 IRQ3, COM2 2F8 IRQ4, COM3 3E8 IRQ3, COM4 2E8 IRQ4, Auto
  Serial Port2 IR Mode Disabled: 본 제품은 지원하지 않음
  Parallel Port Address Disabled, LPT3 3BC IRQ7, LPT1 378 IRQ7, LPT2 278 IRQ 7, LPT3 3BC IRQ5, LPT1 378 IRQ5, LPT2278 IRQ5, Auto
  Parallel Port Mode Compatible, Bi-directional, ECP, EPP
  USB Interface Disabled, Enabled
  Advanced Chipset Configuration Press Enter
  Base Memory Size 640KB
  ISA LFB Size Disabled, 1MB
  ISA LFB Base Address 위 항목 선택 시 표시됨
  Video Palette Snoop Disabled, Enabled
  Latency Timer(PCI Clocks) 0 ~ 255( 기본: 66)
  Bank 0 SIMM Detected 메모리 타입 표시
  Bank 1 SIMM Detected 메모리 타입 표시
Power Management Configuration Press Enter
  Advanced Power Management Disabled, Enabled
  IDE Drive Power Down Disabled, Enabled
  VESA Video Power Down Disabled, Standby, Suspend, Sleep
  Inactivity Timer(Minutes) Auto configured, 16, 24, 32, ... , 120, 128
  Hot Key(Ctrl - ALT -)
  Auto Start On AC Loss Disabled, Enabled
  Power Down COM1 Ring Disabled, Enabled
  Plug and Play Configuration Press Enter
  Configuration Mode Use Setup Utility 선택 시
  ISA Shared Memory Size Disabled, 16, 32, 48, 64, 80, 96KB
  IRQ 5 Available, Used by ISA Card
  IRQ 9 Available, Used by ISA Card
  IRQ 10 Available, Used by ISA Card
  IRQ 11 Available, Used by ISA Card
  Plug and Play Configuration Press Enter
  Configuration Mode Use ICU 선택 시
  Boot with PnP OS Non, Other, Windows 95 TM
  Event Logging Configuration Press Enter(사용자 변경 불필요)
  Event Log Status Valid
  Log Capacity Available
  Count Granularity 10
  Time Granularity(minutes) 30
  Log Control Enabled
  Clear Log No
  Mark Existing Event Read No
  Critical Events in Log:
  Single Bit ECC Errors None
  Multiple Bit ECC Errors None
  POST Errors None
Security User Password is Enabled
  Administrative Password is Enabled
  Set User Password Press Enter
  Set Administrative Password Press Enter
Exit Exit Saving Changes Press Enter
  Exit Discarding Change Press Enter
  Load Setup Default Press Enter
Discard Change Press Enter