NEC 567 Motherboard: Error - IRQ Not Configured

The error message "IRQ not configured-PCI on Motherboard bus; G0, device; 07, Function; 02
CMOS Settings all appear to be correct.

Restart the computer, press F2 to enter setup when the screen full of NEC emblems appears.
Use the right arrow key to get to the Advanced Menu.
On the Advanced Menu, use the down arrow until the line that says "Reset Configuration Data" is highlighted in white.
Press the Plus Sign (+) on the keyboard to change the value from "No" to "Yes".
Press the ESC Key twice, this will brin up the Exit menu. Select "Save Changes and Exit", and press enter.
The computer will restart.

Document Information
KBID# 049517, Last Reviewed: February 06, 1999

Copyright© 1997-1999 Packard Bell NEC, Inc.